Skip to content
Operations

How to Manage School Facilities and Maintenance Schedules

Sam Rivera · School Operations Writer, Borderset · 6 min read

Managing school facilities well comes down to three habits: inspect on a fixed calendar, log every repair request in one place with a clear priority, and budget for upkeep every year instead of waiting for things to break. Preventive maintenance is cheaper than emergency repairs, and a written schedule keeps safety checks from slipping when staff change.

The short answer

Build a facilities plan with four parts: an asset list of every building system, a yearly calendar of inspections and preventive maintenance, a single system for repair requests with agreed priorities, and a maintenance budget based on the value of your buildings. Review it every term with your principal or business manager.

The need is real. The U.S. Government Accountability Office found in 2020 that an estimated 41% of school districts needed to update or replace heating, ventilation and air conditioning (HVAC) systems in at least half of their schools, about 36,000 schools. Facts in this post were checked on 19 November 2026.

Step 1: Know what you have

You cannot schedule maintenance for equipment you have not listed. Start with an asset inventory for each building:

SystemWhat to record
HVACUnits, location, age, filter sizes, service contractor
RoofType, age, last inspection, warranty
Plumbing and waterFixtures, water heaters, drinking water outlets
Electrical and lightingPanels, emergency lighting, generators
Fire and life safetyAlarms, sprinklers, extinguishers, exit signs
Doors and securityLocks, access control, cameras
GroundsPlaygrounds, fields, paving, fencing
KitchenRefrigeration, ovens, dishwashers, hoods

For each item note its age, expected life and condition. GAO found that about two thirds of districts had carried out a facilities condition assessment in the previous ten years; if yours has not, a professional assessment is a good starting point for a long term plan.

Step 2: Plan inspections on a calendar

Some checks are required by law and some are good practice. Put both on one calendar with an owner for each.

CheckHow oftenNotes
Asbestos reinspection (AHERA)At least every 3 yearsBy an accredited inspector, under 40 CFR 763.85
Asbestos periodic surveillanceAt least every 6 monthsRequired under 40 CFR 763.92
Fire alarms, sprinklers, extinguishersAs set by your fire code and local fire marshalKeep certificates on file
HVAC filters and serviceOften monthly to quarterly, per manufacturerLinked to indoor air quality
Playground safetyRegularly, plus after stormsCheck surfacing, fixings and sharp edges
Roof and guttersSpring and autumnClear drains before heavy rain
Drinking water outletsAs your state or district requiresSee EPA's 3Ts guidance below

Asbestos rules also cover staff: under 40 CFR 763.92, maintenance and custodial staff working in buildings with asbestos containing material need at least two hours of awareness training, and new staff must be trained within 60 days of starting.

For indoor air, EPA's Indoor Air Quality Tools for Schools program offers free checklists and guidance. For lead, EPA's 3Ts for reducing lead in drinking water (training, testing and taking action) is voluntary guidance; EPA states there is no safe level of lead in drinking water, especially for children. Check what your state requires.

Step 3: Log every repair request in one place

Requests arrive by email, hallway conversation and notes on the office desk, and that is how they get lost. Use one route for all requests.

  1. One form for everyone. Staff submit the location, the problem, a photo if possible and how urgent it seems.
  2. Triage daily. The facilities lead assigns a priority, an owner and a target date.
  3. Tell the requester. A short acknowledgment and a note when the job is done stop repeat requests.
  4. Record what was done, including parts, time and cost, against the asset.
  5. Review the log monthly for repeat problems. Three calls about the same boiler means it needs a decision, not another repair.

A simple priority scale keeps decisions consistent:

PriorityExamplesTarget response
1. EmergencyGas smell, flooding, no heat in winter, broken exterior door lockImmediately
2. UrgentBroken toilet, failed classroom lighting, leaking roofWithin 1 to 2 school days
3. RoutineSticking door, damaged ceiling tile, paintWithin 2 weeks
4. PlannedUpgrades and improvementsScheduled into holidays

Adjust the targets to your staffing, but write them down and share them with staff.

Step 4: Schedule preventive maintenance

Preventive maintenance is work done before something breaks: changing filters, servicing boilers, cleaning gutters, testing generators. It reduces emergency repairs and helps equipment last longer.

  • Turn manufacturer guidance into recurring tasks for each asset in your inventory.
  • Use school holidays for disruptive work such as floor refinishing or major HVAC servicing. Our guide to building a school master calendar shows how to reserve those windows early.
  • Plan around the school day. Schedule noisy work outside lesson time and avoid exam weeks.
  • Coordinate rooms. When a classroom is out of use for repairs, move classes in the timetable rather than improvising on the day. See how to prevent double booked rooms and teachers.

Step 5: Budget for upkeep

Maintenance is often the first line cut when budgets are tight, and the cost comes back later as bigger repairs. The 21st Century School Fund's State of Our Schools 2021 report describes common benchmarks based on a building's current replacement value (CRV), what it would cost to rebuild today:

Benchmark from the 2021 reportShare of current replacement value per year
Typical maintenance and operations benchmark2%
Maintenance and operations used in the report (includes security and utilities)3%
Capital renewal and investment4%

The same report estimated that districts spent about $56 billion a year on maintenance and operations in fiscal years 2017 to 2019, against a $84 billion standard, a shortfall of about $27.6 billion a year.

To use this locally:

  1. Estimate the replacement value of each building, or use your insurance values as a rough guide.
  2. Compare your current maintenance spending with the benchmark.
  3. Separate routine maintenance from capital projects in the budget, so one does not quietly absorb the other.
  4. Build a five year capital plan for roofs, HVAC and other big items, using the ages and expected lives in your inventory.
  5. Keep a contingency for emergencies.

Our guide on how to build a school budget explains how to fit facilities into the wider budget cycle.

Step 6: Staff, contractors and records

  • Name one facilities lead for each site, even in a small school, and a backup.
  • Keep contractor details, contracts and certificates in one shared place.
  • Record keys and access cards issued and returned.
  • Keep inspection reports and logs for as long as your district or state requires.
  • Include facilities in emergency plans. Shutoff locations for gas, water and electricity should be known to more than one person. See our school safety drills guide.

Facilities and maintenance checklist

  • Asset inventory for every building, with age and condition
  • Facilities condition assessment within the last ten years
  • One calendar with all required inspections and owners
  • AHERA reinspection and 6 month surveillance on schedule
  • Staff asbestos awareness training up to date
  • One route for repair requests, triaged daily
  • Written priority levels and target response times
  • Preventive maintenance tasks scheduled for each asset
  • Disruptive work booked into school holidays
  • Maintenance budget compared with a replacement value benchmark
  • Five year capital plan
  • Contractor certificates and inspection records filed

How Borderset helps

Borderset is a school management system rather than a facilities work order tool, but it helps with the school side of maintenance. Schedule management lets you move classes when a room is out of use and avoid double booking, announcements to families keep parents informed about closures or works, and teacher tracking helps leaders see which staff are affected by room changes. To see it with your own timetable, book a demo.

For related operations topics, read about school transportation planning, running school lunch and cafeteria operations and school data backups and continuity planning.

Frequently asked questions

How often do schools need asbestos inspections?

Under the federal AHERA rules, schools must reinspect known or assumed asbestos containing material at least every three years and carry out periodic surveillance at least every six months.

What is preventive maintenance in a school?

Planned work done before equipment fails, such as changing HVAC filters, servicing boilers and clearing gutters, scheduled from an asset list and manufacturer guidance.

How much should a school spend on maintenance?

A common benchmark cited by the 21st Century School Fund is about 2% of a building's current replacement value per year for maintenance and operations, with a further amount for capital renewal.

How should schools prioritise repair requests?

Use written priority levels, for example emergency, urgent, routine and planned, each with a target response time, and triage new requests daily.

How many schools need HVAC upgrades?

GAO estimated in 2020 that 41% of districts needed to update or replace HVAC systems in at least half their schools, about 36,000 schools.

Who should manage facilities in a small school?

Name one facilities lead and a backup, even if it is part of another role, and give them one calendar, one request log and the budget.

Back to all posts